Name | Export Permit requirement for Minerals, Ores or Mineral products |
---|---|
Description | No person is allowed to export any minerals, ores or mineral products without a permit issued by the Ministry of Mines and Mineral Development |
Comments | Anyone seeking to export any minerals, ores or mineral products must apply for a permit |
Validity From | 13-09-1995 |
Validity To | 09-09-9999 |
Reference | PART III, Division 7, Section 47 |
Technical Code | |
Agency | 25 |
Created Date | 2019-12-04 11:40:07 |
Updated Date | 2020-12-08 11:38:50 |
Status | Active |
Measure Type | Permit Requirement |
Legal/Regulation | The Mines and Minerals Development Act, 2015 |
Un Code |
Procedure Name | Description | Category | View Procedure Detail with Relevant Forms |
---|---|---|---|
Export Permit for Minerals, Ores or Mineral Products | The following procedure outlines the necessary steps that need to be taken in order to obtain a permit to export any minerals, ores or mineral products from the Ministry of Mines and Minerals Development. | Export | View |
This measure applies to commodity/s
HS Code | Description |
---|---|
7219140000 | Hot-rolled stainless steel, in coils, >=600mm by <3mm |
7219210000 | Hot-rolled stainless steel, uncoiled, >=600mm by >10mm |
7219220000 | Hot-rolled stainless steel, uncoiled, >=600mm by 4.75-10mm |
7219230000 | Hot-rolled stainless steel, uncoiled, >=600mm by 3-4.75mm |
7219240000 | Hot-rolled stainless steel, uncoiled, >=600mm by <3mm |
7219310000 | Cold-rolled stainless steel, uncoiled, >=600mm by >4.75mm |
7219320000 | Cold-rolled stainless steel, uncoiled, >=600mm by 3-4.75mm |
7219330000 | Cold-rolled stainless steel, uncoiled, >=600mm by 1-3mm |
7219340000 | Cold-rolled stainless steel, uncoiled, >=600mm by 0.5-1mm |
7219350000 | Cold-rolled stainless steel, uncoiled, >=600mm by <0.5mm |