Name | Export Permit requirement for Minerals, Ores or Mineral products |
---|---|
Description | No person is allowed to export any minerals, ores or mineral products without a permit issued by the Ministry of Mines and Mineral Development |
Comments | Anyone seeking to export any minerals, ores or mineral products must apply for a permit |
Validity From | 13-09-1995 |
Validity To | 09-09-9999 |
Reference | PART III, Division 7, Section 47 |
Technical Code | |
Agency | 25 |
Created Date | 2019-12-04 11:40:07 |
Updated Date | 2020-12-08 11:38:50 |
Status | Active |
Measure Type | Permit Requirement |
Legal/Regulation | The Mines and Minerals Development Act, 2015 |
Un Code |
Procedure Name | Description | Category | View Procedure Detail with Relevant Forms |
---|---|---|---|
Export Permit for Minerals, Ores or Mineral Products | The following procedure outlines the necessary steps that need to be taken in order to obtain a permit to export any minerals, ores or mineral products from the Ministry of Mines and Minerals Development. | Export | View |
This measure applies to commodity/s
HS Code | Description |
---|---|
7208250000 | FLAT/HOT-ROLLED IRON/STEEL,IN COILS,WIDTH >=600MM,PICKLED, >=4.75MM THICK |
7208260000 | FLAT/HOTROLLED IRON/STEEL,IN COILS,WID>=600MM,PICKLED,>=3MM BUT<4.7MM THCK |
7208270000 | Flat/hot-rolled iron/steel,in coils, width >=600mm, pickled, <3 mm thick |
7208360000 | FLAT/HOT-ROLLED IRON/STEEL,IN COILS,WIDTH>=600MM,NOT PICKLED,>10MM THICK |
7208370000 | FLAT/HOTROLLED IRON/STEEL,IN COILS,WID>=600MM,NOT PCKLD,>=4.75MM BUT<=10MM |
7208380000 | FLAT/HOTROLLD IRON/STEEL,COILS,WID.>=600MM,NOT PICKLD>=3MM BUT<4.75MMTHICK |
7208390000 | Flat/hot-rolled iron/steel,in colis, width >=600mm, not pickled,<3mm thick |
7208400000 | FLAT/HOTROLLED IRON/STEEL,NOT COILS,WIDTH>=600MM,WITH PATTERNS IN RELIEF |
7208510000 | Flat/hot-rolled iron/steel,not in coils, width >=600mm, > 10mm thick |
7208520000 | FLAT/HOTROLLED IRON/STEEL,NOT IN COILS,WID>=600MM,>=4.75MM BUT <=10MM THCK |